ISHRAE 10001:2019 · ASHRAE 62.1
Indoor air quality testing in Navi Mumbai and Mumbai
IAQ surveys for data centre NOCs, control rooms, offices and labs. We measure what people breathe, find where ventilation is falling short, and give your facilities team a clear list of fixes.
Why IAQ matters in a building full of machines
A data centre is designed for servers, but the NOC, security and office areas are occupied 24 hours a day. These rooms are often small, sealed and running on recirculated air. CO₂ builds up overnight shifts, and staff report headaches and drowsiness long before anyone checks the air.
Mumbai's outdoor PM2.5 also rises sharply between November and February. If your fresh-air filtration is not sized for it, that dust ends up inside, on people and on equipment.
What we do on site
- Agree zones and occupancy with your facilities team, and log the HVAC mode during the test
- Log each parameter continuously at breathing height, 1.1 m seated or 1.7 m standing
- Take an outdoor reference at the same time, so we can separate indoor sources from outdoor air
- Check fresh-air dampers, filter condition and supply airflow where access allows


Common reference values
Your project specification or rating system sets the final limit. These are the reference points most Indian projects start from.
| Parameter | Common reference | Source | Usual cause when high |
|---|---|---|---|
| CO₂ | ≤ 1,000 ppm | ASHRAE 62.1 practice, ISHRAE 10001 | Too little fresh air for occupancy |
| PM2.5 | ≤ 15 µg/m³ (24 h) | WHO 2021 guideline | Outdoor dust, poor filtration |
| PM2.5 | ≤ 60 µg/m³ (24 h) | India NAAQS 2009 | Regulatory ambient limit |
| PM10 | ≤ 100 µg/m³ (24 h) | India NAAQS 2009 | Construction dust, open doors |
| TVOC | ≤ 500 µg/m³ | LEED and WELL practice | New furniture, paints, cleaning chemicals |
| Formaldehyde | ≤ 100 µg/m³ (30 min) | WHO guideline | Pressed wood, adhesives |
| CO | ≤ 2 mg/m³ (8 h) | India NAAQS 2009 | DG or vehicle exhaust entering |
| Temperature / RH | 23 to 26 °C / 40 to 60% | Comfort practice | HVAC setpoints, latent load |