Colo Enviro LabsEnvironmental testing Request a quote
Home / Water and Legionella testing

IS 10500:2012 · ISO 11731 · ASHRAE 188

Water, cooling tower and Legionella testing

One lab for every water stream in a data centre: potable, cooling tower, chilled water, humidifier feed, STP outlet, fire water and liquid cooling fluid. Chemistry and microbiology are both done at our Navi Mumbai lab.

Chemistry 3 to 5 working daysLegionella 10 to 14 daysSample transit within 24 h

Why an independent water test matters

Most sites rely on the water treatment vendor's own test kit. That is fine for daily control, but the same company that doses the chemicals is reporting whether the dosing works. An independent lab result, taken on the same day, is how you check that the numbers match.

Cooling towers are the main Legionella risk in a data centre. Warm water, sunlight, nutrients and aerosol drift make them ideal for bacterial growth. A positive result found early is a disinfection and a review. Found late, it is a health incident.

Chilled water loops fail more slowly. Rising iron and copper, falling inhibitor and bacterial growth tell you the loop is corroding long before a pipe leaks under the raised floor.

Water testing bench with jar test stirrer and glassware
Chemistry and microbiology are run in-house, so a cooling tower sample gives you scaling indices and Legionella from the same bottle set.
Legionella colonies on a culture plate under UV light
Legionella colonies on a culture plate (photo: CDC / James Gathany, public domain).

Water streams and test panels

Panels can be adjusted to your water management plan or consent conditions.

StreamKey parametersReference
Potable / drinkingpH, turbidity, TDS, hardness, chloride, iron, residual chlorine, total coliform, E. coliIS 10500:2012
Cooling towerpH, conductivity, TDS, calcium and total hardness, M-alkalinity, chloride, silica, iron, free chlorine, total bacterial count, Legionella; LSI and RSI scaling indicesWater treatment plan, ASHRAE 188, ISO 11731
Chilled water (closed loop)pH, conductivity, iron, copper, inhibitor residual (nitrite or molybdate), total bacterial countTreatment vendor specification
Humidifier feedConductivity, hardness, silica, total bacterial countHumidifier manufacturer limits
STP / ETP treated waterpH, BOD, COD, TSS, oil and grease, faecal coliformMPCB consent conditions
Fire water tankpH, turbidity, hardness, iron, bacterial countFire system maintenance practice
Liquid cooling fluidGlycol %, pH, conductivity, inhibitor, dissolved metals, particle cleanlinessISO 4406, CDU manufacturer limits

Water testing FAQs

How often should a cooling tower be tested for Legionella?
Most water safety plans test cooling towers for Legionella every quarter, and monthly when a previous result was above the action level or after a system change. Chemistry such as pH, conductivity and biocide residual should be checked weekly by your water treatment vendor, with an independent check every month or quarter.
What Legionella result should trigger action?
ASHRAE 188 asks you to set action levels in your water management plan rather than fixing one number. Many plans in India follow UK HSG274 practice for cooling towers: review the treatment between 100 and 1,000 CFU/L, and act immediately with disinfection above 1,000 CFU/L.
How should water samples be collected?
We supply sterile bottles. Bottles for microbiology contain sodium thiosulphate to neutralise chlorine. Samples are kept cool and must reach the lab within 24 hours. If you want us to collect, our team samples to the same protocol and records the chain of custody.
Do you test liquid cooling fluids for direct-to-chip systems?
Yes. We check glycol concentration, pH, conductivity, inhibitor level, dissolved metals and particle cleanliness to ISO 4406, against the limits given by your CDU or cold plate manufacturer.

Request a test plan

Tell us the site, the rooms and the standard you have to meet.

We reply within one working day with a sampling plan, the number of test points, turnaround and a fixed quote. Site visits across Mumbai, Navi Mumbai, Thane and Pune, and pan-India on project basis.

Emailinfo@coloenvirolabs.com
Phone+91 96395 35455
WhatsAppChat on WhatsApp
LabGoodwill Bizhub, MIDC Pawne, Thane-Belapur Road, Navi Mumbai 400703
LandmarkNext to IKEA Navi Mumbai, Turbhe