Our lab, our equipment and how to reach us

Colo Enviro Labs runs field testing and laboratory analysis from one site in Navi Mumbai, close to the region's largest cluster of data centres. Samples collected in the morning are in the lab the same day.

Find us next to IKEA Turbhe

Colo Enviro Labs Pvt. Ltd.
Goodwill Bizhub, MIDC Pawne, Thane-Belapur Road, Navi Mumbai 400703

Landmark: the building is beside the IKEA Navi Mumbai store on Thane-Belapur Road, a short walk from Turbhe railway station on the Trans-Harbour line.

By road: from Vashi or Sanpada, take Palm Beach Road to Turbhe and turn onto Thane-Belapur Road towards Mahape. From Airoli or Ghansoli, head south on Thane-Belapur Road; the building comes up just after Mahape, before the IKEA junction.

Hours: Monday to Saturday, 9:30 am to 6:30 pm. Sample drop-off during these hours. Call ahead for microbiology samples.

Open in Google Maps

Goodwill Bizhub, beside IKEA Navi Mumbai on Thane-Belapur Road, Turbhe. Directions →

Instrumentation

Twelve instrument lines, one quality system

Field instruments and lab equipment are covered by one calibration register. Every report lists the instruments used, their serial numbers and calibration due dates.

Handheld laser particle counters6 channels, 0.3 to 10 µm, 2.83 L/min, for room surveysISO 14644-1

Benchtop / remote particle counter28.3 L/min (1 CFM) flow for large cleanrooms and long loggingISO 14644-1

Corrosion classification couponsCopper and silver coupons, 30-day exposureANSI/ISA-71.04

Multi-parameter IAQ analyserCO₂, CO, PM2.5, PM10, TVOC, HCHO, T, RH with data loggingISHRAE 10001

Gravimetric dust sampling kitPump, cassettes and filters for dust mass in mg/m³Gravimetric method

Thermo-hygrometers and anemometersRack inlet temperature, humidity and air velocityASHRAE TC 9.9

Digital micro-manometerRoom and under-floor differential pressureISO 14644-3

IR thermal camera, lux and sound metersRadiometric thermography, illuminance and noise surveysNFPA 70B

Water chemistry benchpH, conductivity, TDS, hardness, alkalinity, chloride, silicaIS 3025 methods

Metals and anion analysisIron, copper and other metals, plus anions, in process waterInstrumental analysis

Microbiology and Legionella suiteIncubators, biosafety cabinet and media for TBC, coliforms and LegionellaISO 11731

Fluid cleanliness kitParticle cleanliness and glycol checks for liquid cooling loopsISO 4406

SAMPLE — replace before launch Modern IT park office building exterior, Airoli, Navi Mumbai (sample placeholder photo — not the actual Goodwill Bizhub building)

Modern IT park office building exterior, Airoli, Navi Mumbai (sample placeholder photo — not the actual Goodwill Bizhub building)

SAMPLE — replace before launch Laboratory glassware and flasks with coloured liquid samples on a bench (sample placeholder photo)

SAMPLE — replace before launch Antibiotic sensitivity test on a petri dish in a microbiology laboratory (sample placeholder photo)

How we keep results trustworthy

Quality system built to ISO/IEC 17025, with NABL accreditation in progress
Chain of custody on every coupon and water sample, from site to bench
Field blanks and duplicates on water and coupon batches
Raw data in every report, not only a summary, so readings can be rechecked
Trained technicians who also hold data centre site safety training: permit-to-work, ESD, LOTO awareness and hot-aisle safety

Group advantage. CEL is part of the Colo Techxpert Solutions group, which provides specialist cleaning and facility management to data centres across India. Our technicians know how a live data hall works, and they work to the same site rules your own team follows.

Lab FAQs

Where exactly is the Colo Enviro Labs lab?

Our lab is in Goodwill Bizhub, MIDC Pawne, on Thane-Belapur Road, Navi Mumbai 400703. The building is next to the IKEA Navi Mumbai store at Turbhe and a short walk from Turbhe railway station.

Can I drop samples at the lab?

Yes, Monday to Saturday, 9:30 am to 6:30 pm. Please call ahead for Legionella and microbiology samples so we can log them in on arrival and start incubation the same day.

How is instrument calibration controlled?

Every instrument has a calibration schedule and a certificate traceable to national or international standards. The serial number and calibration due date of each instrument used are printed on your report. Instruments past their due date are tagged and taken out of service.

Request a test plan

Tell us the basics — we reply within one working day

You get a sampling plan, the number of test points, turnaround and a fixed quote. No obligation.